Starlink Setup:
1. Install the mounting plate facing upwards on a flat rooftop with clear view of the sky with the slope towards the north.
2. Attach the dish to the mounting plate and plug the large end of the 100-ft cable into the dish.
3. Run that 100-ft cable through the wall and connect the small end of the 100-ft cable to the white PSU box indoors.
4. Plug in power to the white PSU box.
5. Connect the end of the dish cable to the white PSU.
6. Plug the network-style end of the 25-ft cable into silver Cisco Meraki Wi-Fi router at port INTERNET-1.
7. Connect power to the black Cisco Wi-Fi router.
8. Double-check all connections and look for steady white lights.
*Note: Both the silver Cisco and white PSU box from Starlink should be mounted indoors; but if you are desperate for extra distance to the rooftop, you can mount the white PSU outdoors and run the network cable through the wall to the
silver Cisco inside for a total of 125ft between the Wi-Fi router and the dish.
This is an example of a setup at a jobsite trailer: